3.2 Applicable Standards and Publications
When generating CAD documents the following standards and publications should be referenced for guidance.
3.2.1 MDOT MAA Standards Standards and Applications
This standard is to be used in conjunction with:
A. MDOT MAA’s Planning and Engineering Guidelines & Standards (PEGS)
B. MDOT MAA’s AIRPortal Standard
C. MDOT MAA's Design and Construction Standard
D. MDOT MAA Data Quality Standard
E. MDOT MAA Data Security Standard
F. MDOT MAA Naming, Identification & Addressing Standard
G. MDOT MAA Airport Information Retreival Portal (AIRPortal)
1. AIRPortal provides access and reference to the most current MDOT MAA documentation.
2. The most current Standard Borders, Title Blocks and Index Sheets can be found in AIRPortal under General > PEGS Reference Documents > PEGS V2-Architecture and Engineering > PEGS Appendix 2C - Standard Contract Drawings
3. A user account is required to sign into AIRPortal
4. A user account may be requested from the AIRPortal sign-in page
A. FAA Order JO 7350.9 Location Identifiers
B. FAA Order 6000.5F Facilities, Services and Equipment Profile (FSEP)
C. FAA Order JO 7340.2N Contractions
D. FAA AC 150/5300-16B “General Guidance and Specifications for Aeronautical Surveys: Establishment of Geodetic Control and Submission to the National Geodetic Survey”, July 08, 2019
E. FAA AC 150/5300-17C “Standards for Using Remote Sensing Technologies in Airport Surveys”, Sept. 30, 2011
F. FAA AC 150/5300-18B “General Guidance and Specifications for Aeronautical Surveys: Airport Survey Data Collection and Geographic Information System Standards”, May 21, 2009
A. ANSI/AWS A2.4 Symbols for Welding & Nondestructive Testing
B. ANSI/AWS A3.0 Welding Terms and Definitions
C. ANSI B1.1 Unified Screw Threads
D. ANSI/1EEE 2.16 Reference Designations for Electrical and Electronics Parts and Equipment
E. ANSI/1EEE 91 Graphic Symbols for Logic Functions
F. ANSI Y1.1 Abbreviations for use on Drawings and Text
G. ANSI Y14.1 Drawing Sheet Size and Format
H. ANSI Y14.2 Line Conventions and Lettering
I. ANSI Y14.5 Dimensioning and Tolerance
J. ANSI Y14.6 Screw Thread Representation
K. ANSI Y14.7.1 Gear Drawing Standards - Part 1 for Spur, Helical, Double Helical and Rack
L. ANSI Y14.7.2 Gear and Spline Drawing Standards Part 2 - Bevel and Hypoid Gears
M. ANSI Y14.13 Mechanical Spring Representation
N. ANSI Y14.15 Electrical and Electronics Diagrams
O. ANSI Y14.15 Interconnection Diagrams
P. ANSI Y14.17 Fluid Power Diagrams
Q. ANSI Y14.26.3 Dictionary of Terms for Computer-Aided Preparation of Product Definition Data
R. ANSI Y32.2 Graphic Symbols for Electrical and Electronic Diagrams
S. ANSI Y32.4 Graphic Symbols for Plumbing Fixture for Diagram used in Architecture & Building Construction
T. ANSI Y 32.9 Graphic Symbols for Electrical Wiring and Layout Diagrams Used in Architecture and Building Construction United States National CAD Standard, Version 5
U. ASME-Y14.38M ASME Drawing & Terminology Standards
3.2.4 Order of Precedence
In the event of conflict between the documents referenced in Section 3.2.2 Government Documents and Section 3.2.3 Commercial Documents and the contents of this standard, the contents of this standard shall be considered the superseding requirement.
This CAD Standard takes precedence over any possible contradictory information in the PEGS Manual.