10.2      Grease Interceptors

All food and beverage facilities and other facilities where liquid containing grease is discharged into the sanitary sewer system shall be equipped with Automatic Grease Interceptors:

A.     Grease Interceptors shall be automatic grease recovery type made of 304 Stainless Steel and internally lined with molded polyethylene equipped with the following devices:

1.      Rotating gear hydrophobic wheel assembly for automatic grease or oil removal.

2.      Integral flow control device.

3.      Self-regulating enclosed electric immersion heater.

4.      Vent connection.

5.      Integral gas trap.

6.      Programmable 24-hour multi-event time control.

7.      Gasket and fully removable 304 Stainless Steel lid.

8.      Electric motor with thermal overload protection and automatic reset switch.

9.      Removable solids strainer basket.

10.   Removable translucent collection container.

B.     Grease Interceptors shall be Big Dipper as manufactured by Thermaco or approved equal.

C.      Grease Interceptors shall be floor mounted.

D.     Grease Interceptors shall be designed and located with sufficient clearances and space for service and maintenance.